- Posts: 46
- Thank you received: 2
Discussing equipment for making CDS - new method
- ghs174
-
- Offline
- Senior Member
-
Less
More
03 Jul 2013 01:09 #34302
by ghs174
Replied by ghs174 on topic Discussing equipment for making CDS - new method
Can someone tell me where to get a good small air diffuser?
I started to make CDS but the air diffuser I was using got deteriorated to where the plastic tube connects to the stone bubbler by the gas.It melted the plastic in the cold water.
I started to make CDS but the air diffuser I was using got deteriorated to where the plastic tube connects to the stone bubbler by the gas.It melted the plastic in the cold water.
Please Log in or Create an account to join the conversation.
- pam
-
- Offline
- Platinum Boarder
-
Less
More
- Posts: 4593
- Thank you received: 3706
03 Jul 2013 01:48 #34303
by pam
Replied by pam on topic Discussing equipment for making CDS - new method
That's the problem with air diffusers - the barb melts. I don't use one anymore, it's not needed at all if you use the shot-glass method.
Please Log in or Create an account to join the conversation.
- ghs174
-
- Offline
- Senior Member
-
Less
More
- Posts: 46
- Thank you received: 2
03 Jul 2013 02:01 #34305
by ghs174
Replied by ghs174 on topic Discussing equipment for making CDS - new method
can the the shot-glass method make 24000 ppm?
Please Log in or Create an account to join the conversation.
- JB13
-
- Offline
- Platinum Member
-
03 Jul 2013 04:42 - 03 Jul 2013 04:46 #34307
by JB13
Replied by JB13 on topic Discussing equipment for making CDS - new method
ghs174, the melting diffuser problem is one of the reasons why some of us don't use the heating method any longer. Also, if you get the reactor too hot, some of the CA whatever gets into the CDS according to Andreas.
Yes, you can make just as strong or stronger CDS using the over night/shot glass method mainly because it is a closed system-none of the ClO2 gas can escape during the reaction period.
If the first batch is not strong enough, leave the CDS you just made in the receiver container and refill the reactor with fresh ingredients and let it sit another 12 hours. Keep doing that until you get what you what or it blows up, whatever happens first!
Be sure to keep it out of sunlight, even filtered sunlight. You might have noticed in the Kerri Rivera CDS videos that there is a lot of "fog" in the receiver. That is outgassed ClO2 and is caused by sunlight. That could be dangerous!
Yes, you can make just as strong or stronger CDS using the over night/shot glass method mainly because it is a closed system-none of the ClO2 gas can escape during the reaction period.
If the first batch is not strong enough, leave the CDS you just made in the receiver container and refill the reactor with fresh ingredients and let it sit another 12 hours. Keep doing that until you get what you what or it blows up, whatever happens first!
Be sure to keep it out of sunlight, even filtered sunlight. You might have noticed in the Kerri Rivera CDS videos that there is a lot of "fog" in the receiver. That is outgassed ClO2 and is caused by sunlight. That could be dangerous!
Last edit: 03 Jul 2013 04:46 by JB13.
Please Log in or Create an account to join the conversation.
- ghs174
-
- Offline
- Senior Member
-
Less
More
- Posts: 46
- Thank you received: 2
03 Jul 2013 10:55 #34313
by ghs174
Replied by ghs174 on topic Discussing equipment for making CDS - new method
what is the container glass or plastic?
has this proses ever blown up on anyone?
has this proses ever blown up on anyone?
Please Log in or Create an account to join the conversation.
- ghs174
-
- Offline
- Senior Member
-
Less
More
- Posts: 46
- Thank you received: 2
03 Jul 2013 17:27 #34318
by ghs174
Replied by ghs174 on topic Discussing equipment for making CDS - new method
does the MMS1 sodium chlorite degrade over time?
Please Log in or Create an account to join the conversation.
- JB13
-
- Offline
- Platinum Member
-
03 Jul 2013 17:51 #34321
by JB13
Replied by JB13 on topic Discussing equipment for making CDS - new method
ghs174, you can read the warnings in this thread, Tomas is a chemist.
g2cforum.org/index.php/list/welcome/24854-cds-12000?start=27#26477
g2cforum.org/index.php/list/welcome/24854-cds-12000?start=27#26477
Please Log in or Create an account to join the conversation.
- ghs174
-
- Offline
- Senior Member
-
Less
More
- Posts: 46
- Thank you received: 2
03 Jul 2013 19:49 - 03 Jul 2013 19:50 #34324
by ghs174
Replied by ghs174 on topic Discussing equipment for making CDS - new method
has anyone ever had skin discoloration (slight orange) that lasts for 1-3 days on there finger tips after using MMS1 with DMSO?
I did not have this problem with CDS and DMSO.
Also is it OK to use a cotton ball to apply it?
I did not have this problem with CDS and DMSO.
Also is it OK to use a cotton ball to apply it?
Last edit: 03 Jul 2013 19:50 by ghs174.
Please Log in or Create an account to join the conversation.
- pam
-
- Offline
- Platinum Boarder
-
Less
More
- Posts: 4593
- Thank you received: 3706
04 Jul 2013 00:32 - 04 Jul 2013 00:33 #34331
by pam
Replied by pam on topic Discussing equipment for making CDS - new method
I make mine in glass. I've never had anything blow up on me, either process. I understand some people have had - but I have not. I prefer to make mine in a container with at least 50% distilled water - the ClO2 has more to sink into.
Sodium chlorite, properly stored, should not degrade perceptibly over time. It needs to be kept dry and cool and away from any biological products.
The discoloration on the finger is actually the yellow of the chlorine dioxide gas. It goes away in a day or so. I cannot think of any reason that you cannot use a cotton ball to apply, as long as it has no chemicals in it, and isn't made of an artifical substance.
Sodium chlorite, properly stored, should not degrade perceptibly over time. It needs to be kept dry and cool and away from any biological products.
The discoloration on the finger is actually the yellow of the chlorine dioxide gas. It goes away in a day or so. I cannot think of any reason that you cannot use a cotton ball to apply, as long as it has no chemicals in it, and isn't made of an artifical substance.
Last edit: 04 Jul 2013 00:33 by pam.
The following user(s) said Thank You: paul
Please Log in or Create an account to join the conversation.
- ghs174
-
- Offline
- Senior Member
-
Less
More
- Posts: 46
- Thank you received: 2
05 Jul 2013 01:33 - 05 Jul 2013 01:36 #34354
by ghs174
Replied by ghs174 on topic Discussing equipment for making CDS - new method
I am about to give up on making CDS 24000ppm let alone 6-12000ppm (if their is such a thing), it just is not working. All I get is -5000ppm after using 2 full MMS bottles. I don't get it!
so I tried the-5000ppm and my autoimmune disease relapse again so I stopped the MMS took the immunosuppressant injection and NSAIDs to reduce the symptoms so I will be able to function.
I don't know, it seems MMS is stronger than CDS.
so I tried the-5000ppm and my autoimmune disease relapse again so I stopped the MMS took the immunosuppressant injection and NSAIDs to reduce the symptoms so I will be able to function.
I don't know, it seems MMS is stronger than CDS.
Last edit: 05 Jul 2013 01:36 by ghs174.
Please Log in or Create an account to join the conversation.
Time to create page: 0.411 seconds