- Posts: 127
- Thank you received: 72
MMS: sodium chlorite (NaClO2) 28%
MMS1 or Activated MMS: chlorine dioxide (ClO2)
MMS1 or Activated MMS: chlorine dioxide (ClO2)
Sodium Chlorite Solution?
- jbnet
-
Topic Author
- Offline
- Premium Member
-
Less
More
03 Dec 2011 20:39 #8727
by jbnet
Sodium Chlorite Solution? was created by jbnet
Is there any health benefits or harm with taking Sodium Chlorite without activating?
Please Log in or Create an account to join the conversation.
- townsend
-
- Offline
- New Member
-
Less
More
- Posts: 12
- Thank you received: 7
03 Dec 2011 22:23 #8732
by townsend
Replied by townsend on topic Re: Sodium Chlorite Solution?
For water purification 2 drops of Sodium Chlorite per gallon is suggested. Then wait 24 hours before drinking.
I have a quart size drinking bottle. Over the course of 6 months I put 1-10 drops per day of Sodium Chlorite nto my drinking water. You may remember from Jim Humble's book, when he first discovered MMS, he was deep in the jungle, where members of his party got malaria. Not able to get to civilization in time, he gave them Stablized Oxygen (sodium chlortie), where he then discovered sodium chlorite aa cure for malaria, which he later named MMS.
So-- given this history-- I thought it would be perfectly fine, putting the MMS, without an activator in my water. I must admite, it did have a positive effect on my health. But now in hindsight, I know doing this for such a long time was a mistake. Eventually, the super alkalinity of the water I was drinking had an adverse affect on my stomach, producing the symptom of pain, whenever I ate. It too another couple of months drinking regular water for my stomach to heal and get over this trauma.
It was then I resigned myself to always using an activator. I guess I was just looking to save some time. I think I was probably on the right track-- especially when I was drinking lemon juice right afterward, which would activated the Sodium Chlorite already in my system. But I did this so infrequently it did not matter.
As for whether or not to use Sodium Chlorite, without an activator, I wouldn't recommend it, unless there was no other alternative. In the early days, Jim Humble cured many cases of malaria this way, even though the dosages were large, this treatment was never for an extended period of time. As history goes, sometimes it worked and sometimes it didn't. Eventually he discovered the activator. It's now clear that the times when it did work, were likely when these natives had enough citric acid in their system to act as an activator. When it didn't work, chances are fruit containing Vitamin C was prevalent in their system, which as you know is a de-activator, or antidote for MMS.
So again, I would not recommend doing this. For a while there, I was really worried, thinking I had done permanent damage to my stomach lining. Luckily I recovered.
I have a quart size drinking bottle. Over the course of 6 months I put 1-10 drops per day of Sodium Chlorite nto my drinking water. You may remember from Jim Humble's book, when he first discovered MMS, he was deep in the jungle, where members of his party got malaria. Not able to get to civilization in time, he gave them Stablized Oxygen (sodium chlortie), where he then discovered sodium chlorite aa cure for malaria, which he later named MMS.
So-- given this history-- I thought it would be perfectly fine, putting the MMS, without an activator in my water. I must admite, it did have a positive effect on my health. But now in hindsight, I know doing this for such a long time was a mistake. Eventually, the super alkalinity of the water I was drinking had an adverse affect on my stomach, producing the symptom of pain, whenever I ate. It too another couple of months drinking regular water for my stomach to heal and get over this trauma.
It was then I resigned myself to always using an activator. I guess I was just looking to save some time. I think I was probably on the right track-- especially when I was drinking lemon juice right afterward, which would activated the Sodium Chlorite already in my system. But I did this so infrequently it did not matter.
As for whether or not to use Sodium Chlorite, without an activator, I wouldn't recommend it, unless there was no other alternative. In the early days, Jim Humble cured many cases of malaria this way, even though the dosages were large, this treatment was never for an extended period of time. As history goes, sometimes it worked and sometimes it didn't. Eventually he discovered the activator. It's now clear that the times when it did work, were likely when these natives had enough citric acid in their system to act as an activator. When it didn't work, chances are fruit containing Vitamin C was prevalent in their system, which as you know is a de-activator, or antidote for MMS.
So again, I would not recommend doing this. For a while there, I was really worried, thinking I had done permanent damage to my stomach lining. Luckily I recovered.
The following user(s) said Thank You: so8
Please Log in or Create an account to join the conversation.
- kwag
-
- Offline
- Elite Member
-
03 Dec 2011 23:37 #8735
by kwag
The recommended drops is 5 to 10 drops per gallon of tap water. I use 10 drops per gallon, for double purpose:
1) Kill pathogens, fungus, bacteria, etc. in the water.
2) It raises alkalinity of the water.
-Karl
www.mmspr.net - El vórtice de la realidad -
forum.mmspr.net
• Easy, free way to support Jim Humble, Genesis II Church, MMS
• Jim Humble's MMS Books
• MMS Video Course
• MMS Testimonials
• MMS Newsletter
Replied by kwag on topic Re: Sodium Chlorite Solution?
townsend wrote: For water purification 2 drops of Sodium Chlorite per gallon is suggested. Then wait 24 hours before drinking.
The recommended drops is 5 to 10 drops per gallon of tap water. I use 10 drops per gallon, for double purpose:
1) Kill pathogens, fungus, bacteria, etc. in the water.
2) It raises alkalinity of the water.
-Karl
www.mmspr.net - El vórtice de la realidad -
forum.mmspr.net
• Easy, free way to support Jim Humble, Genesis II Church, MMS
• Jim Humble's MMS Books
• MMS Video Course
• MMS Testimonials
• MMS Newsletter
Please Log in or Create an account to join the conversation.
- rondellejones
-
- Offline
- New Member
-
Less
More
- Posts: 12
- Thank you received: 2
04 Dec 2011 00:01 - 04 Dec 2011 00:02 #8742
by rondellejones
Sorry for the overkill, I want to be 100% sure...
You are saying that JUST adding the inactivated sodium chlorite with NO acid activator would do this?
1) Kill pathogens, fungus, bacteria, etc. in the water.
2) It raises alkalinity of the water.
?
Thanks!
Replied by rondellejones on topic Re: Sodium Chlorite Solution?
kwag wrote:
townsend wrote: For water purification 2 drops of Sodium Chlorite per gallon is suggested. Then wait 24 hours before drinking.
The recommended drops is 5 to 10 drops per gallon of tap water. I use 10 drops per gallon, for double purpose:
1) Kill pathogens, fungus, bacteria, etc. in the water.
2) It raises alkalinity of the water.
-Karl
Sorry for the overkill, I want to be 100% sure...
You are saying that JUST adding the inactivated sodium chlorite with NO acid activator would do this?
1) Kill pathogens, fungus, bacteria, etc. in the water.
2) It raises alkalinity of the water.
?
Thanks!
Last edit: 04 Dec 2011 00:02 by rondellejones.
Please Log in or Create an account to join the conversation.
- kwag
-
- Offline
- Elite Member
-
04 Dec 2011 03:05 - 04 Dec 2011 03:16 #8748
by kwag
Yes. Just look at a regular bottle of MMS (Sodium Chlorite), and you'll see in the back instructions that say to purify water, you use 5 to 10 drops per gallon
This is what we've been doing at home for over a year now.
We have a "Britta" water filter pitcher in the fridge, and two one gallon plastic jars.
Every time we fill the plastic jars from the unfiltered water fawcet, we add 10 drops of sodium chlorite to each gallon, and put them in the fridge. After 24 hours, the water from the oldest of the two jars is poured into the Britta jar. This water is already purified with the Sodium Chlorite, but of course "dirty" with killed pathogens, bacteria, etc. So the Britta filter takes care of that, and now we have pure/filtered cold drinking water
-Karl
www.mmspr.net - El vórtice de la realidad -
forum.mmspr.net
• Easy, free way to support Jim Humble, Genesis II Church, MMS
• Jim Humble's MMS Books
• MMS Video Course
• MMS Testimonials
• MMS Newsletter
Replied by kwag on topic Re: Sodium Chlorite Solution?
rondellejones wrote:
kwag wrote:
townsend wrote: For water purification 2 drops of Sodium Chlorite per gallon is suggested. Then wait 24 hours before drinking.
The recommended drops is 5 to 10 drops per gallon of tap water. I use 10 drops per gallon, for double purpose:
1) Kill pathogens, fungus, bacteria, etc. in the water.
2) It raises alkalinity of the water.
-Karl
Sorry for the overkill, I want to be 100% sure...
You are saying that JUST adding the inactivated sodium chlorite with NO acid activator would do this?
1) Kill pathogens, fungus, bacteria, etc. in the water.
2) It raises alkalinity of the water.
?
Thanks!
Yes. Just look at a regular bottle of MMS (Sodium Chlorite), and you'll see in the back instructions that say to purify water, you use 5 to 10 drops per gallon
This is what we've been doing at home for over a year now.
We have a "Britta" water filter pitcher in the fridge, and two one gallon plastic jars.
Every time we fill the plastic jars from the unfiltered water fawcet, we add 10 drops of sodium chlorite to each gallon, and put them in the fridge. After 24 hours, the water from the oldest of the two jars is poured into the Britta jar. This water is already purified with the Sodium Chlorite, but of course "dirty" with killed pathogens, bacteria, etc. So the Britta filter takes care of that, and now we have pure/filtered cold drinking water
-Karl
www.mmspr.net - El vórtice de la realidad -
forum.mmspr.net
• Easy, free way to support Jim Humble, Genesis II Church, MMS
• Jim Humble's MMS Books
• MMS Video Course
• MMS Testimonials
• MMS Newsletter
Last edit: 04 Dec 2011 03:16 by kwag.
The following user(s) said Thank You: rondellejones
Please Log in or Create an account to join the conversation.
Time to create page: 0.391 seconds